Sarthak Enterprises

Power Consumption	2 HP
Machine Type	Fully Automatic
Job Thickness	0.5mm to14mm
System Control	control panel
Max Sheet Width	all size
Machine Body Material	ms sheet
Material	ms , en31, EN8
Phase	3 phase
Motor	2 HP motor
Mounted Type	table mounted
Power Input	3 phase
Speed	15meter/min , 20 and 25 meter/ min.
roller material	EN31 hard chrome
Max Width	75mm, 100mm , 1800mm
Material thickness	0.5mm to14mm
Pinching Roller	2 front side and back side 2 roller
Sheet Thickness	0.5mm to14mm

We are leading manufactutrer & supplier of Motorized Decoiler Machine. We ensure to provide good quality products to our customers.

Usage/Application	Coil Handling
Material	ms
Color	all
Decoiling Speed	15meter / min , 20 meter / min
Phase	3 phase
Motor	2 HP , 3 HP
Width	As per customer requirement
Gross Weight	225 kg for 500 kg
Inner Diameter	450mm to 600mm

We are leading manufactutrer & supplier of Motorized Decoiler Machine. We ensure to provide good quality products to our customers.

Usage/Application	Industrial
Brand	SARTHAK ENTERPRISES
Suitable For	SS,CR,CRGP,CRC,AL,MS, HR
Automation Grade	Fully Automatic
No Of Roll	TOTAL 9 , 11, 18 . AS PER CUSTOMER REQUIREMENT
Roll Centre	800MM, 900MM, 1000MM, 1200MM, 1500MM
roller material	En31 , d2

We are engaged in manufacturing and exporting various Component Straighteners like Strip Straighteners and Sheet Levellers that are available as per the material specifications and another requirement of clients. Our range is widely demanded among our clients, owing to their quality features such as durability, user-friendly operations, simple use and maintenance free. Further, we also test these machines on various parameters to match with the international quality standards.

Manufacturer & Exporter of Component Straightener. Our product range also comprises of Pneumatic Feeder, Cut To Length Line and Press Automation Systems.

• Fully NC control machine with touch screen facility
• Synchronize with any type of power press
• Very useful for auto blanking
• Movement of both axis by highly accurate servo motors
• Y-axis movement on hardened chrome rods by highly accurate liner ball screw

Features:

• Suitable for CRC and HR metals
• Capable of handling different thickness materials
• Optimum working speed
• Best quality bearings
• Hardened rollers for better results

Usage/Application	Industrial
Brand	SARTHAK ENTERPRISES
Suitable For	SS,CR,CRGP,CRC,AL,MS, HR
Automation Grade	Fully Automatic
No Of Roll	TOTAL 9 , 11, 18 . AS PER CUSTOMER REQUIREMENT
Country of Origin	Made in India

We develop straightening machines for any type of components. These component straighteners are used for straightening of components of any shape from the minimum thickness of 0.1mm up to 40mm thick. Minimum width of component can be 10mm up to 2000 mm. Max flatness accuracy of 0.030 mm(30 microns) have been achieved in some machines.The Component straightener can be is 4 Hi or 6 Hi as per the components.Components can be of any material. Component straightener consists of hi precision ground hard chrome plated rollers. Each roller is driven by separate propeller shaft from the Axillary Gear box of ELECON / NORD make. Each roller is mounted on precision needle roller bearings of INA (Germany make)/IKO (Japan Make).

Auxiliary gear box consists of hardened and ground precision gears mounted on needle roller bearings with brass washers on both sides of the gears. 4 Dial indicators of Mitutoyo/Baker to read the up and down of the rollers. Up and down of the rollers is done by Worm Assy and screws with micro thread. All the plates of the head of the straightener are precision grounded. Slides and bottom plate of the straightening head are scraped. Our component straighteners are CE-Marked (by America Quality Standard Registrar).Component straightener can also be equipped with variable frequency drive ABB make to change the speed of the motor as per change in the material of the component to save the down time to change the pulley of the motor or gearbox. Each bearing is lubricated with hand/motorized lubrication pump to increase the life of the bearing. Component Straightener can be equipped with belt conveyor or pneumatic automatic feeder equipped with Festo make pneumatic and digital counter to count the total components feed. Slides of the feeder are of hardened and precision ground.

Usage/Application	Industrial
Brand	sarthak Enterprises
Suitable For	all grade material
Automation Grade	Fully Automatic
Gauge	all gauge
Sheet Thickness	1mm to 3mm, 4mm, to 14mm
Country of Origin	Made in India

Sheet Straighteners Machines are used for straightening and ctl line for leveling the sheets with more thickness than the normal metal sheets. The product is designed using optimum resources for the heavy duty work which is driven by the powerful gear motor. Hassle free operations and enhanced features of the machine have resulted in its increased efficiency and reliability. Different capacity models are available to satisfy the variegated demands of our esteemed customers.  Powerful to handle different thicker metal sheets  Automatic feeding equipment to enhance productivity  To assist input/output it uses rack  Rolls made of quenched steel  High durability  Electronic components which never break down

Usage/Application	Industrial
coil width	100mm,200mm, 300mm, 400mm, 1800mm.
warranty	1 year
Coil id	as per customer requirement
weight carrying capacity	500kg , 1 ton , 2 ton , 5 ton

The Heavy Duty Decoiler is available with brake de-coiling (shoe type). The heavy duty decoiler is capable of withstanding heavy loads due to its precision construction. In the interior, the coils are spread across the expandable drum while the centering is done by movement of the screw in front & toughened EN8 shaft mounted on 2 Radial Ball Bearings.

Usage/Application	Industrial
Brand	SARTHAK ENTERPRISES
Diameter	1.5 - 3 mm
Suitable For	Mild Steel
Automation Grade	Fully Automatic
Gauge	18 SWG

Pull - Through Wire StraightenerPull - Through Wire Straightener is used for Straightening of wires & rectangular sections.

STANDARD FEATURES

• 5 / 7 / 9 / 11 / 13 Rollers in two-axis depending on accuracy requirement.
• Non-Driven.
• For Wire Size of 1.5 to 3.0 mm