Sarthak Enterprises

NC Servo feeder machine is popular for its easy-operation and smart control feature. Here we list full series items below for your choice. With servo feeder machine, you do not need to worry about complicated setting operation. Its feeding performance is more precision and accurate. Whatever, you may be wondering if you should replace your traditional feeder machine, or which type NC feeder is better for your business. I would like to make a cooperation to figure it out.

Compared to pneumatic air feeder machine: air feeder /AF is one of the most easily coil feeder machines, and still widely spread among press workshop. There are some other kind of AF machines, here we only taking the most popular one, driven by air pressure and get singles from punch machine output shaft. AF performances well on regular stamping line, which means no strict accurate standard, feeding speed is steady not fast. Its price is always a can not refuse advantage. But AF has a short life cycle and easy peak out. NC feeder is much more expensive than AF, but its feeding accuracy is really the highest performance among all kinds of feeder machine, and its life cycle is about 10+ years.

Compared to mechanical roller feeder machine: Roller feeder/ RFS has been popular for more than 100 years since the stamping machine appears. It is famous for its high speed. RFS has its running power by a long iron rod connecting between RFS and press machine. So RFS always keep the same space with press stroke, no matter fast or slow. But feeding length of RFS is greatly limited by the rod cycling path. NC Servo feeder is driven by servomotor, so you can easily set feeding length at any length you need.

In addition to the advantages of low failure rate and unlimited feeding step setting, NC servo feeder also has the following unique advantages:

1.Intuitive and convenient operation mode

2.Accurate feeding without damaging the material

3.With push and pull two feeding methods
For thin plate soft materials, it can be installed in a pulling method, and the pulling material is accurate, which fundamentally avoids scratching the material.

4.Two relaxation methods are available (only one is assembled) to meet different needs（The following will introduce）

5. With feeding parameter storage function
Multiple sets of feeding parameters can be stored in the nc feeder according to requirements, and can be used directly when replacing the corresponding mold, which greatly reduces the downtime and debugging time.

Brand : Sarthak Enterprises

Quotation for Straightener cum  servo feeder & Decoiler Hydraulic Servo feeder

strip width               550mm

strip thickness         4mm

two roller servo feeder all roller hard grinding & chrome 

two roller sported  roller dia 88mm 3kw servo motor & plantery gear box 

servo make Siemens or Panasonic  

Pneumatic cylinder2pc size 125*50

all plate 25mm

suitable electrical penal

Brand : Sarthak Enterprises

strip width              500mm

strip thickness       4mm

total roller 9 all roller hard grinding d2 

2hp motor 3" gear box

Centre Height  From Floor : 1050 mm

Occupy  Area : 1000X1200X1400 mm

using material coil Dp780,E34,BSK46.

Brand : Sarthak Enterprises 

strip width           600mm

coil weight           5 ton

coil id                450 to 550mm

coil od                1200mm 

Jaw expenses for hydraulic system

Hydraulic car carrier  

5hp gear motor With arm 

Brand : Sarthak Enterprises

Warranty :1 year 

Voltage : 220 - 440 v

After Sales Service Available : Yes

Country of Origin : Made in India

Sheet Thickness :0.2 to 5 mm

Coil width 10 mm to 100mm 

coil using material ms , ss304 

two roller servo feeder all roller hard grinding & chrome 

two roller sported  roller dia 88mm 3kw servo motor & plantery gear box 

servo make simens or pnasonic  

Pneumatic cylinder2pc size 125*50

all plate 25mm

sutibale eletrical penal 

Brand : Sarthak Enterprises

2hp motor 3" gear box

7 roller Straightening roller dia 88 mm 

 All roller hard grinding &all roller hard chrome,

 d2 material roller material  

Servo feeder up & down for motorized system 

Centre Height  From Floor : 1050 mm

Occupy  Area : 1000X1200X1400 mm

coil using material ms , ss304 

Warranty :1 year 

Brand : Sarthak Enterprises

Usage/Application : Industrial Decoiler

Material : Mild Steel

Voltage : 240 v

Machine Type : Industrial Decoiler

Motor : 2 hp

coil width max 300mm

id 300mm

od 1000mm

weight carrying capacity 1 ton.

NC Servo Feeder has the high-performance brush, less servo drive, low inertia brush and less AC servo motor with high energy. Our range of NC Servo Feeder has adjustable mounting brackets with transition plate and jack screw for press line adjustment /- 50 mm.

Features:

• Hard chrome plated.
• Surface hardness: HRC is 600.
• Assure Non-Slip Positive Feeding.
• Exit Anti-Buckle Stock Bridge.
• Brand : Sarthak Enterprises
• Quotation for Straightener cum  servo feeder & Decoiler

Press Room in their endure to bring latest technology for feeder, have brought NC Servo Roll feeder technology for presses in year 2001. Today with installation in various part of country to handle strip width from 100 mm to 1250 mm & thickness from 0.1 mm to 12.00 mm fully programmable units have be interlinked with small / medium / large presses.

Various models have been manufactured & following standards models are available in short deliveries.

Features of NC Servo Roll Feeder

• Precision incremental Optical Encoder (In built) to provide velocity & position loop feed back
• Hardened Terminal : Easy-to-read solid state Interface Terminal display area with a backlit 4 line display, sealed membrane keypad with tactile feedback
• Batch counting : The operator chooses the number of parts to make and the Interface Terminal will display a message when the count is reached. Up to 999,999
• Advanced Feed-Angle Monitoring : Continually monitors the feed-angle and the material position
• Compact electronic Control Enclosure with built-in Operation Panel that can be easily adapted for press mounting or used as a freestanding console

• Accuracy to ± 0.025mm roll position is achieved through, closed-loop servo control and precision gearing
• Smoother feeder operations with controlled acceleration profiles
• Up to 99 parts can be pre-programmed by part number, each having unique length, feed rate, acceleration and jerk configuration
• Multiple cycle choices-feed before press, press before feed, or intermittent operations - allow the user to set up the roll feed specific to his needs
• Input Power: 230/ 415V, 3 Phase

• Programmable Rotary Limit Switch for Setting of the Safe Feed and Pilot Release Windows, with digital crank rotation position and Press Speed Indicator
• Adjustable Pilot Release Cam Pin for mounting to press ram
• Pneumatic / mechanical / servo roll release for pilot release
• Proximity sensor to initiate feed cycle instead of limit switch
• Screw Adjustable/ Hydraulic Jack Press Mounting Bracket
• Remote Pendant with Forward and Reverse Jog Push Buttons
• Additional measuring wheel on strip for measurement

Press Room in their endure to bring latest technology for feeder, have brought NC Servo Roll feeder technology for presses in year 2001. Today with installation in various part of country to handle strip width from 100 mm to 1250 mm & thickness from 0.1 mm to 12.00 mm fully programmable units have be interlinked with small / medium / large presses.

Various models have been manufactured & following standards models are available in short deliveries.

Features of NC Servo Roll Feeder

• Precision incremental Optical Encoder (In built) to provide velocity & position loop feed back
• Hardened Terminal : Easy-to-read solid state Interface Terminal display area with a backlit 4 line display, sealed membrane keypad with tactile feedback
• Batch counting : The operator chooses the number of parts to make and the Interface Terminal will display a message when the count is reached. Up to 999,999
• Advanced Feed-Angle Monitoring : Continually monitors the feed-angle and the material position
• Compact electronic Control Enclosure with built-in Operation Panel that can be easily adapted for press mounting or used as a freestanding console

• Accuracy to ± 0.025mm roll position is achieved through, closed-loop servo control and precision gearing
• Smoother feeder operations with controlled acceleration profiles
• Up to 99 parts can be pre-programmed by part number, each having unique length, feed rate, acceleration and jerk configuration
• Multiple cycle choices-feed before press, press before feed, or intermittent operations - allow the user to set up the roll feed specific to his needs
• Input Power: 230/ 415V, 3 Phase

• Programmable Rotary Limit Switch for Setting of the Safe Feed and Pilot Release Windows, with digital crank rotation position and Press Speed Indicator
• Adjustable Pilot Release Cam Pin for mounting to press ram
• Pneumatic / mechanical / servo roll release for pilot release
• Proximity sensor to initiate feed cycle instead of limit switch
• Screw Adjustable/ Hydraulic Jack Press Mounting Bracket
• Remote Pendant with Forward and Reverse Jog Push Buttons
• Additional measuring wheel on strip for measurement

In addition to the advantages of low failure rate and unlimited feeding step setting, NC servo feeder also has the following unique advantages:

1.Intuitive and convenient operation mode

2.Accurate feeding without damaging the material

3.With push and pull two feeding methods
For thin plate soft materials, it can be installed in a pulling method, and the pulling material is accurate, which fundamentally avoids scratching the material.

4.Two relaxation methods are available (only one is assembled) to meet different needs（The following will introduce）

5. With feeding parameter storage function
Multiple sets of feeding parameters can be stored in the nc feeder according to requirements, and can be used directly when replacing the corresponding mold, which greatly reduces the downtime and debugging time.

NC Servo feeder machine is popular for its easy-operation and smart control feature. Here we list full series items below for your choice. With servo feeder machine, you do not need to worry about complicated setting operation. Its feeding performance is more precision and accurate. Whatever, you may be wondering if you should replace your traditional feeder machine, or which type NC feeder is better for your business. I would like to make a cooperation to figure it out.

Compared to pneumatic air feeder machine: air feeder /AF is one of the most easily coil feeder machines, and still widely spread among press workshop. There are some other kind of AF machines, here we only taking the most popular one, driven by air pressure and get singles from punch machine output shaft. AF performances well on regular stamping line, which means no strict accurate standard, feeding speed is steady not fast. Its price is always a can not refuse advantage. But AF has a short life cycle and easy peak out. NC feeder is much more expensive than AF, but its feeding accuracy is really the highest performance among all kinds of feeder machine, and its life cycle is about 10+ years.

Compared to mechanical roller feeder machine: Roller feeder/ RFS has been popular for more than 100 years since the stamping machine appears. It is famous for its high speed. RFS has its running power by a long iron rod connecting between RFS and press machine. So RFS always keep the same space with press stroke, no matter fast or slow. But feeding length of RFS is greatly limited by the rod cycling path. NC Servo feeder is driven by servomotor, so you can easily set feeding length at any length you need.

In addition to the advantages of low failure rate and unlimited feeding step setting, NC servo feeder also has the following unique advantages:

1.Intuitive and convenient operation mode

2.Accurate feeding without damaging the material

3.With push and pull two feeding methods
For thin plate soft materials, it can be installed in a pulling method, and the pulling material is accurate, which fundamentally avoids scratching the material.

4.Two relaxation methods are available (only one is assembled) to meet different needs（The following will introduce）

5. With feeding parameter storage function
Multiple sets of feeding parameters can be stored in the nc feeder according to requirements, and can be used directly when replacing the corresponding mold, which greatly reduces the downtime and debugging time.

3 In 1 NC Servo Straightener Feeder W/Uncoiler

Save Looping Space, Increase Safety Coiled material is from uncoiler through both left and right free guide rollers with advance photo sensors keeps looping. Through the opener device and bending roller system feeding the coiled material from up to down, passing opener device, coil tip flatness device, pinch rollers, work rollers, feed rollers to make the coiled material passing in an excellent smooth feeding

STANDARD ACCESSORY:

Electric eye loop control system

Feed and straightener rolls hard chrome plated

Outgoing catenary to assist and support the material

Hold down arm device

Feeding line easily adjusted by advance worm gear screw jacks device

Uncoiler with inverter control

Reference indicator adjuster

Eccentric Roller (Upper)-easy to set up the up curve or down curve feeding exit direction

Hand-set coil width guide at outlet side

Hand-wheel-adjusted coil width guides at straightener inlet side

Threading table device

Coil tip de-bender

Uncoiler with air disc brake

A-frame type coil keeper

OPTION:

LIHAO’S coil car

Features

1. Flexible operation mode: All the functions of the feeder are concentrated on the PLC and a portable knob. The operator can fix all the movement functions of the device in one place.So don’t worry about operating or wasting time because there are too many function keys.  

2. High efficiency and safety: It reduces unnecessary time and improves work efficiency that mechanical action instead of manual operation. And it has a large number of auxiliary functions of feeding and supporting materials, so that the operator can keep away from the material to the maximum extent. 

3. Convenient control mode: Users can freely switch between punch master or device master according to their needs, which maximizes the adaptability of the device and save costs for users.

4. Reasonable footprint: While Lihao NCHF series are powerful, the form factor are also the most reasonable in the industry, which can maximize the cost of the site.

5. Strong control system compatibility: The NCHF series uses a full set of Japanese Mitsubishi control systems, which are compatible with various standards at home and abroad. Users do not need to worry about data conversion and other issues, and can directly operate.

6. Reasonable design: The NCHF series is the first product in the industry to introduce industrial design. While ensuring the basic performance of the equipment, it maximizes the visibility of the equipment and improves the comfort of operation.

Product Description

NC Servo Feeder

NC Servo Feeder has the high-performance brush, less servo drive, low inertia brush and less AC servo motor with high energy. Our range of NC Servo Feeder has adjustable mounting brackets with transition plate and jack screw for press line adjustment /- 50 mm.Press Room in their endure to bring latest technology for feeder, have brought NC Servo Roll feeder technology for presses in year 2001. Today with installation in various part of country to handle strip width from 100 mm to 1250 mm & thickness from 0.1 mm to 12.00 mm fully programmable units have be interlinked with small / medium / large presses.

Various models have been manufactured & following standards models are available in short deliveries.

Features of NC Servo Roll Feeder

Servo System Features:

• Precision incremental Optical Encoder (In built) to provide velocity & position loop feed back
• Hardened Terminal : Easy-to-read solid state Interface Terminal display area with a backlit 4 line display, sealed membrane keypad with tactile feedback
• Batch counting : The operator chooses the number of parts to make and the Interface Terminal will display a message when the count is reached. Up to 999,999
• Advanced Feed-Angle Monitoring : Continually monitors the feed-angle and the material position
• Compact electronic Control Enclosure with built-in Operation Panel that can be easily adapted for press mounting or used as a freestanding console

Additional Features:

• Accuracy to ± 0.025mm roll position is achieved through, closed-loop servo control and precision gearing
• Smoother feeder operations with controlled acceleration profiles
• Up to 99 parts can be pre-programmed by part number, each having unique length, feed rate, acceleration and jerk configuration
• Multiple cycle choices-feed before press, press before feed, or intermittent operations - allow the user to set up the roll feed specific to his needs
• Input Power: 230/ 415V, 3 Phase

Accessories & Options:

• Programmable Rotary Limit Switch for Setting of the Safe Feed and Pilot Release Windows, with digital crank rotation position and Press Speed Indicator
• Adjustable Pilot Release Cam Pin for mounting to press ram
• Pneumatic / mechanical / servo roll release for pilot release
• Proximity sensor to initiate feed cycle instead of limit switch
• Screw Adjustable/ Hydraulic Jack Press Mounting Bracket
• Remote Pendant with Forward and Reverse Jog Push Buttons
• Additional measuring wheel on strip for measurement

NC Servo feeder machine is popular for its easy-operation and smart control feature. Here we list full series items below for your choice. With servo feeder machine, you do not need to worry about complicated setting operation. Its feeding performance is more precision and accurate. Whatever, you may be wondering if you should replace your traditional feeder machine, or which type NC feeder is better for your business. I would like to make a cooperation to figure it out.

Compared to pneumatic air feeder machine: air feeder /AF is one of the most easily coil feeder machines, and still widely spread among press workshop. There are some other kind of AF machines, here we only taking the most popular one, driven by air pressure and get singles from punch machine output shaft. AF performances well on regular stamping line, which means no strict accurate standard, feeding speed is steady not fast. Its price is always a can not refuse advantage. But AF has a short life cycle and easy peak out. NC feeder is much more expensive than AF, but its feeding accuracy is really the highest performance among all kinds of feeder machine, and its life cycle is about 10+ years.

Application:

• In Automobile Industry

• In electrical Industry

• In Gas fit Industry

NC Servo feeder machine is popular for its easy-operation and smart control feature. Here we list full series items below for your choice. With servo feeder machine, you do not need to worry about complicated setting operation. Its feeding performance is more precision and accurate. Whatever, you may be wondering if you should replace your traditional feeder machine, or which type NC feeder is better for your business. I would like to make a cooperation to figure it out.

Compared to pneumatic air feeder machine: air feeder /AF is one of the most easily coil feeder machines, and still widely spread among press workshop. There are some other kind of AF machines, here we only taking the most popular one, driven by air pressure and get singles from punch machine output shaft. AF performances well on regular stamping line, which means no strict accurate standard, feeding speed is steady not fast. Its price is always a can not refuse advantage. But AF has a short life cycle and easy peak out. NC feeder is much more expensive than AF, but its feeding accuracy is really the highest performance among all kinds of feeder machine, and its life cycle is about 10+ years.

Compared to mechanical roller feeder machine: Roller feeder/ RFS has been popular for more than 100 years since the stamping machine appears. It is famous for its high speed. RFS has its running power by a long iron rod connecting between RFS and press machine. So RFS always keep the same space with press stroke, no matter fast or slow. But feeding length of RFS is greatly limited by the rod cycling path. NC Servo feeder is driven by servomotor, so you can easily set feeding length at any length you need.

In addition to the advantages of low failure rate and unlimited feeding step setting, NC servo feeder also has the following unique advantages:

1.Intuitive and convenient operation mode

2.Accurate feeding without damaging the material

3.With push and pull two feeding methods
For thin plate soft materials, it can be installed in a pulling method, and the pulling material is accurate, which fundamentally avoids scratching the material.

4.Two relaxation methods are available (only one is assembled) to meet different needs（The following will introduce）

5. With feeding parameter storage function
Multiple sets of feeding parameters can be stored in the nc feeder according to requirements, and can be used directly when replacing the corresponding mold, which greatly reduces the downtime and debugging time.

Press Room in their endure to bring latest technology for feeder, have brought NC Servo Roll feeder technology for presses in year 2001. Today with installation in various part of country to handle strip width from 100 mm to 1250 mm & thickness from 0.1 mm to 12.00 mm fully programmable units have be interlinked with small / medium / large presses.

Various models have been manufactured & following standards models are available in short deliveries.

sarthak auto mation was the first Indian manufacturer to recognize potential of new technology of Servo-driven Press Feeding equipment in 2019. Press Room Automation has redesigned and simplified its entire servo feed line employing innovative, new manufacturing techniques to bring you the highest quality, lowest maintenance, most economical servo line ever.

Servo-driven feed rolls grip and move material rapidly and precisely into a stamping press or automation operation. sarthak enterprises includes user-friendly features at no extra charge – quick-release handles to adjust roller stock guides, exit support and stock buckle bridge, transition mounting brackets, positive pilot release and roll release for material insertion via Pneumatic Cylinder are just a few of our standard features. All sarthak automation  Servo Roll Feed models have extra-large rolls to withstand the toughest abuse and harshest pressroom environment. Compare our rated specifications and generous roll diameter against any other feed builder.

NC Servo feeder machine is popular for its easy-operation and smart control feature. Here we list full series items below for your choice. With servo feeder machine, you do not need to worry about complicated setting operation. Its feeding performance is more precision and accurate. Whatever, you may be wondering if you should replace your traditional feeder machine, or which type NC feeder is better for your business. I would like to make a cooperation to figure it out.

Compared to pneumatic air feeder machine: air feeder /AF is one of the most easily coil feeder machines, and still widely spread among press workshop. There are some other kind of AF machines, here we only taking the most popular one, driven by air pressure and get singles from punch machine output shaft. AF performances well on regular stamping line, which means no strict accurate standard, feeding speed is steady not fast. Its price is always a can not refuse advantage. But AF has a short life cycle and easy peak out. NC feeder is much more expensive than AF, but its feeding accuracy is really the highest performance among all kinds of feeder machine, and its life cycle is about 10+ years.

Compared to mechanical roller feeder machine: Roller feeder/ RFS has been popular for more than 100 years since the stamping machine appears. It is famous for its high speed. RFS has its running power by a long iron rod connecting between RFS and press machine. So RFS always keep the same space with press stroke, no matter fast or slow. But feeding length of RFS is greatly limited by the rod cycling path. NC Servo feeder is driven by servomotor, so you can easily set feeding length at any length you need.In addition to the advantages of low failure rate and unlimited feeding step setting, NC servo feeder also has the following unique advantages:

1.Intuitive and convenient operation mode

2.Accurate feeding without damaging the material

3.With push and pull two feeding methods
For thin plate soft materials, it can be installed in a pulling method, and the pulling material is accurate, which fundamentally avoids scratching the material.

4.Two relaxation methods are available (only one is assembled) to meet different needs（The following will introduce）

5. With feeding parameter storage function
Multiple sets of feeding parameters can be stored in the nc feeder according to requirements, and can be used directly when replacing the corresponding mold, which greatly reduces the downtime and debugging time.

• Accuracy to ± 0.025mm roll position is achieved through, closed-loop servo control and precision gearing
• Smoother feeder operations with controlled acceleration profiles
• Up to 99 parts can be pre-programmed by part number, each having unique length, feed rate, acceleration and jerk configuration
• Multiple cycle choices-feed before press, press before feed, or intermittent operations - allow the user to set up the roll feed specific to his needs
• Input Power: 230/ 415V, 3 Phase

NC Servo feeder machine is popular for its easy-operation and smart control feature. Here we list full series items below for your choice. With servo feeder machine, you do not need to worry about complicated setting operation. Its feeding performance is more precision and accurate. Whatever, you may be wondering if you should replace your traditional feeder machine, or which type NC feeder is better for your business. I would like to make a cooperation to figure it out.

Compared to pneumatic air feeder machine: air feeder /AF is one of the most easily coil feeder machines, and still widely spread among press workshop. There are some other kind of AF machines, here we only taking the most popular one, driven by air pressure and get singles from punch machine output shaft. AF performances well on regular stamping line, which means no strict accurate standard, feeding speed is steady not fast. Its price is always a can not refuse advantage. But AF has a short life cycle and easy peak out. NC feeder is much more expensive than AF, but its feeding accuracy is really the highest performance among all kinds of feeder machine, and its life cycle is about 10+ years.

Compared to mechanical roller feeder machine: Roller feeder/ RFS has been popular for more than 100 years since the stamping machine appears. It is famous for its high speed. RFS has its running power by a long iron rod connecting between RFS and press machine. So RFS always keep the same space with press stroke, no matter fast or slow. But feeding length of RFS is greatly limited by the rod cycling path. NC Servo feeder is driven by servomotor, so you can easily set feeding length at any length you need.

In addition to the advantages of low failure rate and unlimited feeding step setting, NC servo feeder also has the following unique advantages:

1.Intuitive and convenient operation mode

2.Accurate feeding without damaging the material

3.With push and pull two feeding methods
For thin plate soft materials, it can be installed in a pulling method, and the pulling material is accurate, which fundamentally avoids scratching the material.

4.Two relaxation methods are available (only one is assembled) to meet different needs（The following will introduce）

5. With feeding parameter storage function
Multiple sets of feeding parameters can be stored in the nc feeder according to requirements, and can be used directly when replacing the corresponding mold, which greatly reduces the downtime and debugging time.

3 in 1 decoiler straightener feeder machine main features: 1.adopted specially treated straightening rollers , especially suitable for stretching steel , enhancing the procession precision. 2.the upper straightening roller part was designed to be open type , easy to clean the mechanical part and finish maintence work.(optional part) 3.electric straightening precision adjustment :it is easier to adjust by electric than by manual type. 4.electric &electronic parts adopted european standard products :better in safety , stability, lifetime and so on. Main specification : 1. model : SE -800 ; 2. material width : 70-800 mm ; 3. material thickness : 0.5-4.5 mm ; 4. max.coil weight : 7000 kg ; 5. coil .id : 508 mm ; 6. coil .od :1400 mm ; 7. max .line speed : 22 m per minute ; 8. power supply : 220 v ac 60 hz 380 v ac 50 hz ; 9. air supply : 5 kg cm ^2 ; 10. uncoil expansion : hydraulic

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : 1. All our machines neede to be transported by sea will be well wrapped by plywood case, and the case adopts fumigation free type wood plates. 2. The case protects machines free of dampness, moisture, rust etc and strong enough to stand shock, rough handle.

Delivery Time : shipped in 30days afterpayment

NC Servo feeder machine is popular for its easy-operation and smart control feature. Here we list full series items below for your choice. With servo feeder machine, you do not need to worry about complicated setting operation. Its feeding performance is more precision and accurate. Whatever, you may be wondering if you should replace your traditional feeder machine, or which type NC feeder is better for your business. I would like to make a cooperation to figure it out.

Compared to pneumatic air feeder machine: air feeder /AF is one of the most easily coil feeder machines, and still widely spread among press workshop. There are some other kind of AF machines, here we only taking the most popular one, driven by air pressure and get singles from punch machine output shaft. AF performances well on regular stamping line, which means no strict accurate standard, feeding speed is steady not fast. Its price is always a can not refuse advantage. But AF has a short life cycle and easy peak out. NC feeder is much more expensive than AF, but its feeding accuracy is really the highest performance among all kinds of feeder machine, and its life cycle is about 10+ years.

Compared to mechanical roller feeder machine: Roller feeder/ RFS has been popular for more than 100 years since the stamping machine appears. It is famous for its high speed. RFS has its running power by a long iron rod connecting between RFS and press machine. So RFS always keep the same space with press stroke, no matter fast or slow. But feeding length of RFS is greatly limited by the rod cycling path. NC Servo feeder is driven by servomotor, so you can easily set feeding length at any length you need.

In addition to the advantages of low failure rate and unlimited feeding step setting, NC servo feeder also has the following unique advantages:

1.Intuitive and convenient operation mode

2.Accurate feeding without damaging the material

3.With push and pull two feeding methods
For thin plate soft materials, it can be installed in a pulling method, and the pulling material is accurate, which fundamentally avoids scratching the material.

4.Two relaxation methods are available (only one is assembled) to meet different needs（The following will introduce）

5. With feeding parameter storage function
Multiple sets of feeding parameters can be stored in the nc feeder according to requirements, and can be used directly when replacing the corresponding mold, which greatly reduces the downtime and debugging time.